docs/quick_start.md

# GN Quick Start guide

[TOC]

Note: the gn repo has been ported from chromium, and the tutorial within this
document has not yet been updated to reflect this. Building the tutorial files
will require the chromium tree, even though gn is now independent of chromium.

## Running GN

You just run `gn` from the command line. There is a script in
`depot_tools`, which is presumably in your PATH, with this name. The
script will find the binary in the source tree containing the current
directory and run it.

## Setting up a build

In GYP, the system would generate `Debug` and `Release` build
directories for you and configure them accordingly. GN doesn't do this.
Instead, you set up whatever build directory you want with whatever
configuration you want. The Ninja files will be automatically
regenerated if they're out of date when you build in that directory.

To make a build directory:

```
gn gen out/my_build
```

## Passing build arguments

Set build arguments on your build directory by running:

```
gn args out/my_build
```

This will bring up an editor. Type build args into that file like this:

```
is_component_build = true
is_debug = false
```

You can see the list of available arguments and their default values by
typing

```
gn args --list out/my_build
```

on the command line. Note that you have to specify the build directory
for this command because the available arguments can change according
to what's set.

Chrome developers can also read the [Chrome-specific build
configuration](http://www.chromium.org/developers/gn-build-configuration)
instructions for more information.

## Cross-compiling to a target OS or architecture

Run `gn args out/Default` (substituting your build directory as needed) and
add one or more of the following lines for common cross-compiling options.

```
target_os = "chromeos"
target_os = "android"

target_cpu = "arm"
target_cpu = "x86"
target_cpu = "x64"
```

See [GNCrossCompiles](cross_compiles.md) for more info.

## Configuring goma

Run `gn args out/Default` (substituting your build directory as needed).
Add:

```
use_goma = true
goma_dir = "~/foo/bar/goma"
```

If your goma is in the default location (`~/goma`) then you can omit the
`goma_dir` line.

## Configuring component mode

This is a build arg like the goma flags. run `gn args out/Default` and add:

```
is_component_build = true
```

## Step-by-step

### Adding a build file

Create a `tools/gn/tutorial/BUILD.gn` file [in the chromium repo](https://cs.chromium.org/chromium/src/tools/gn/tutorial/) and enter
the following:

```
executable("hello_world") {
  sources = [
    "hello_world.cc",
  ]
}
```

There should already be a `hello_world.cc` file in that directory,
containing what you expect. That's it! Now we just need to tell the
build about this file. Open the `BUILD.gn` file in the root directory
and add the label of this target to the dependencies of one of the root
groups (a "group" target is a meta-target that is just a collection of
other targets):

```
group("root") {
  deps = [
    ...
    "//url",
    "//tools/gn/tutorial:hello_world",
  ]
}
```

You can see the label of your target is "//" (indicating the source
root), followed by the directory name, a colon, and the target name.

### Testing your addition

From the command line in the source root directory:

```
gn gen out/Default
ninja -C out/Default hello_world
out/Default/hello_world
```

You should see "Hello, world." output to the console.

Side note: GN encourages target names for static libraries that aren't globally
unique. To build one of these, you can pass the label with its path (but no leading
"//") to ninja:

```
ninja -C out/Default tools/gn/tutorial:hello_world
```

### Declaring dependencies

Let's make a static library that has a function to say hello to random
people. There is a source file `hello.cc` in that directory which has a
function to do this. Open the `tools/gn/tutorial/BUILD.gn` file and add
the static library to the bottom of the existing file:

```
static_library("hello") {
  sources = [
    "hello.cc",
  ]
}
```

Now let's add an executable that depends on this library:

```
executable("say_hello") {
  sources = [
    "say_hello.cc",
  ]
  deps = [
    ":hello",
  ]
}
```

This executable includes one source file and depends on the previous
static library. The static library is referenced by its label in the
`deps`. You could have used the full label `//tools/gn/tutorial:hello`
but if you're referencing a target in the same build file, you can use
the shortcut `:hello`.

### Test the static library version

From the command line in the source root directory:

```
ninja -C out/Default say_hello
out/Default/say_hello
```

Note that you **didn't** need to re-run GN. GN will automatically rebuild
the ninja files when any build file has changed. You know this happens
when ninja prints `[1/1] Regenerating ninja files` at the beginning of
execution.

### Compiler settings

Our hello library has a new feature, the ability to say hello to two
people at once. This feature is controlled by defining `TWO_PEOPLE`. We
can add defines like so:

```
static_library("hello") {
  sources = [
    "hello.cc",
  ]
  defines = [
    "TWO_PEOPLE",
  ]
}
```

### Putting settings in a config

However, users of the library also need to know about this define, and
putting it in the static library target defines it only for the files
there. If somebody else includes `hello.h`, they won't see the new
definition. To see the new definition, everybody will have to define
`TWO_PEOPLE`.

GN has a concept called a "config" which encapsulates settings. Let's
create one that defines our preprocessor define:

```
config("hello_config") {
  defines = [
    "TWO_PEOPLE",
  ]
}
```

To apply these settings to your target, you only need to add the
config's label to the list of configs in the target:

```
static_library("hello") {
  ...
  configs += [
    ":hello_config",
  ]
}
```

Note that you need "+=" here instead of "=" since the build
configuration has a default set of configs applied to each target that
set up the default build stuff. You want to add to this list rather than
overwrite it. To see the default configs, you can use the `print`
function in the build file or the `desc` command-line subcommand (see
below for examples of both).

### Dependent configs

This nicely encapsulates our settings, but still requires everybody that
uses our library to set the config on themselves. It would be nice if
everybody that depends on our `hello` library can get this
automatically. Change your library definition to:

```
static_library("hello") {
  sources = [
    "hello.cc",
  ]
  all_dependent_configs = [
    ":hello_config"
  ]
}
```

This applies the `hello_config` to the `hello` target itself, plus all
targets that transitively depend on the current one. Now everybody that
depends on us will get our settings. You can also set `public_configs`
which applies only to targets that directly depend on your target (not
transitively).

Now if you compile and run, you'll see the new version with two people:

```
> ninja -C out/Default say_hello
ninja: Entering directory 'out/Default'
[1/1] Regenerating ninja files
[4/4] LINK say_hello
> out/Default/say_hello
Hello, Bill and Joy.
```

## Add a new build argument

You declare which arguments you accept and specify default values via
`declare_args`.

```
declare_args() {
  enable_teleporter = true
  enable_doom_melon = false
}
```

See `gn help buildargs` for an overview of how this works.
See `gn help declare_args` for specifics on declaring them.

It is an error to declare a given argument more than once in a given scope, so
care should be used in scoping and naming arguments.

## Don't know what's going on?

You can run GN in verbose mode to see lots of messages about what it's
doing. Use `-v` for this.

### Print debugging

There is a `print` command which just writes to stdout:

```
static_library("hello") {
  ...
  print(configs)
}
```

This will print all of the configs applying to your target (including
the default ones).

### The "desc" command

You can run `gn desc <build_dir> <targetname>` to get information about
a given target:

```
gn desc out/Default //tools/gn/tutorial:say_hello
```

will print out lots of exciting information. You can also print just one
section. Lets say you wanted to know where your `TWO_PEOPLE` define
came from on the `say_hello` target:

```
> gn desc out/Default //tools/gn/tutorial:say_hello defines --blame
...lots of other stuff omitted...
  From //tools/gn/tutorial:hello_config
       (Added by //tools/gn/tutorial/BUILD.gn:12)
    TWO_PEOPLE
```

You can see that `TWO_PEOPLE` was defined by a config, and you can also
see the which line caused that config to be applied to your target (in
this case, the `all_dependent_configs` line).

Another particularly interesting variation:

```
gn desc out/Default //base:base_i18n deps --tree
```

See `gn help desc` for more.

### Performance

You can see what took a long time by running it with the `--time` command
line flag. This will output a summary of timings for various things.

You can also make a trace of how the build files were executed:

```
gn --tracelog=mylog.trace
```

and you can load the resulting file in Chrome's `about:tracing` page to
look at everything.